| Chetan Thaker @ 21.09.07 - 19:15:13 |
| "Aspen_Plus_v.11.part2.rar". This file is missing from the shared files. Kindly share the file so that the download can be completed... |
ChEngineer @ 21.09.07 - 23:29:09 |
| The file "Aspen_Plus_v.11.part2.rar" is ok. You must wait for 60-120min before starting to download again. |
Chetan Thaker @ 22.09.07 - 07:50:13 |
thanks for the information..But earlier the problem stated that the file does not exist but today morning it was there. Thanks for that....
I appreciate ur reply but kindly let me know what has to be done after downloading all the files. now only a few f |
ChEngineer @ 24.09.07 - 20:52:14 |
Chetan,
After you download all files you must extract them content using 7-zip, for example. |
ChEngineer @ 24.09.07 - 20:52:25 |
You can found 7-zip here: www.7-zip.org (I recommend it because it's a freeware).
[]'s |
Chemsys @ 26.09.07 - 17:43:05 |
| Hi i am having problem installing aspen its asking for domain name for admin and then for user, i dont know what to do. can u please help me regarding this |
ChEngineer @ 26.09.07 - 18:00:47 |
Chemsys,
Try to find any file text with notes about how install it.
I can't give you a specific help because I've never been installed it. I'm only sharing the links I've found in the internet. |
Cheng @ 29.09.07 - 09:10:48 |
| AspenTech Aspen Engineering Suite 2006, part 21 is missing. can ano one help me. |
sks @ 01.10.07 - 11:26:32 |
| aspentech files are unable to download from rapidshare, pls help, can u give me hysys 3.0/3.1/3.2, ProII |
ChEngineer @ 01.10.07 - 13:47:16 |
Cheng,
I only take these links from a forum in the internet. I've never downloaded them so I don't know if they're valid files. |
ChEngineer @ 01.10.07 - 13:51:25 |
sks,
All Aspen files are OK in rapidshare! If you can't download them trying again later. And always read the instructions in the rapidshare's website to download.
Please, don't request files... I only put these here 'cause I've found them in the intern |
mahmood @ 01.10.07 - 14:53:51 |
hi chengineer
how should i download aspen 2006.....
'no data for outside' msg is being displayed
plz help me....... thanks in advance |
ChEngineer @ 01.10.07 - 16:23:39 |
mahmood,
For me, the files are OK. Try again later. |
Ramakrishna @ 04.10.07 - 06:38:35 |
| Can any one get Star CD CFD code recent version please. |
Rajendrakumar @ 04.10.07 - 07:10:50 |
Me too need star-cd Desperately
Can you any one please upload it |
eve online isk @ 19.10.07 - 11:52:41 |
| Buy eve online isk, eve online isk |
AS @ 20.10.07 - 06:18:13 |
| CAN NY ONE TELL WHR CAN I GET ASPEN 2006 FILE 21 |
chem_eng_pro @ 22.10.07 - 18:40:06 |
| anyone have links for hysys 2004? |
vegrnnoqcr @ 23.11.07 - 18:19:37 |
| Hello! Good Site! Thanks you! xoopoctelnvir |
Aspen HTFS @ 26.11.07 - 06:15:22 |
| greateful if you could provide me the link to download ASPEN HTFS..thanks in advance |
SUDHIR @ 26.11.07 - 07:34:14 |
HELLO!!!! I have downloaded PRO II V8.1 from this webpage. Can anyone send me installation procedure for the same at sudhir.an@gmail.com.
Thanks |
ChEngineer @ 26.11.07 - 16:08:45 |
| Aspen HTFs... If there isn't it in the Aspen Engineering Suite I don't know how provide it. |
ChEngineer @ 26.11.07 - 16:10:43 |
Sudhir,
I can't help you about it 'cause I don't use this software I'm only listing here. |
Mr.Shital Gandhi @ 26.11.07 - 16:35:49 |
Hello dear thanks for posting
keep it up |
Sharath @ 27.11.07 - 07:15:29 |
| I downloaded Proii 8.1 but there is a problem while extracting the R37 file is missing in the chain |
sharath @ 27.11.07 - 11:46:51 |
| Hi All, any one in this site can provide me the crack file of aspen 2006 version |
ChEngineer @ 12.12.07 - 11:42:23 |
Sharath,
Try to download PRO/II from mirror 2. |
hi @ 26.12.07 - 12:22:31 |
can any one help me how to download things from the rapidshare account provided..
thnx in advance........ |
sathish @ 29.12.07 - 04:38:32 |
thank u
please send any HTFS,HTRI software |
engwyk @ 31.12.07 - 00:17:35 |
Can anyone provide mihd.net links please. it's very important.
Thank you |
Nits @ 02.01.08 - 06:38:23 |
| Can somebody tell how to open gPROMS files. It has no extension. Which progarm is to be used for accessing the set up? |
ChEngineer @ 03.01.08 - 13:26:08 |
| Nits, use 7-zip (7-zip.org) to open/extract the files. |
ChEngineer @ 03.01.08 - 13:27:53 |
| EngWyk, you need mihd.net mirror for what files? |
engwyk @ 06.01.08 - 23:45:47 |
| I need mihd.net mirror for AspenTech Aspen Engineering Suite 2006. Please and thank you. |
ChEngineer @ 07.01.08 - 23:55:22 |
| Sorry EngWyK but I don't have one... |
klifa @ 09.01.08 - 14:54:00 |
hello!
why aspentech 2006 is incomplete
thanks |
chemtech @ 13.01.08 - 02:26:12 |
Hi,
Thanks for your post.
aspentech 2006 is incomplete.the setup application file is missing in aspentech2006.so please post the link of part21 .. |
friend @ 16.01.08 - 03:18:06 |
| no doubt u r dng best by this , keep it up who ever u r ???????????? ohhhh a lot of thanxxxxx for this fabulous softwares by the way anybody needs good e-books peterjames23_2007@yahoo.com |
ChEngineer @ 16.01.08 - 11:46:23 |
Klifa and ChemTech,
See my comment in 01.10.07 - 14:47:16
Cheers! |
Leena @ 25.01.08 - 04:24:48 |
| Is anyone able to install PRo-II , if so plz let me know the procedure. I have downloaded the Pro-II from mirror 2 but it's not working. |
friend @ 31.01.08 - 16:58:05 |
another problem aspen 2006 part 3 is missing can anybody re upload it and post link here plzzzzzzz
regards |
FRIEND @ 31.01.08 - 17:01:01 |
| hey ChEngineer !!!!!! could u tell us source of links (forums) so that we can try part 21 , part 3 of aspen 2006 and other broken and dead links |
ChEngineer @ 31.01.08 - 17:20:14 |
Friend,
I've taken the links in the Forum of this website: iqasturias.agoraquimica.com (in Spanish) |
ChEngineer @ 31.01.08 - 17:21:59 |
If you find another links I can add here... Just post the links (Forum) here.
Cheers! |
FRIEND @ 01.02.08 - 01:54:10 |
ChEngineer , oops!!!! i forgot to tell u that i don't know spanish any have i have figuredout aspen 2006 part 21 link
it's actually 26 parts slowly i will post one by one ok (obviously i have links for all 26 parts).........
here i go part 21
http |
FRIEND @ 01.02.08 - 01:57:36 |
OHHHHHHH u c it's not displayed sorry do one thing send me an email (i don't mind even if it is anonymous ) make sure subject of email should be ChEngineer
my id : peterjames23_2007@yahoo.com |
FRIEND @ 02.02.08 - 07:17:42 |
ChEngineer
did u get that y/n ? ( u know what i mean?) |
sum_pro @ 04.02.08 - 06:37:00 |
| Can any one give me the licence file for aspen one 2006, I have downloaded all 26 files from rapidshear but licence file is missing. |
ChEngineer @ 06.02.08 - 13:39:24 |
Sorry for delay, Friend...
I'm travelling and without computer... |
Mentor @ 09.02.08 - 13:56:53 |
| Please can enybody tell me where can I get crack for ChemCAD 5.5 Professional (no ChemCAD 5.5 suite)because i have the software but no crack |
Chemengg @ 11.02.08 - 00:48:56 |
| Hi could any one give the procedure for the instalation of Fluent. Coz when I tried installing its asking for the licence |
shiva @ 16.02.08 - 14:17:07 |
| good effort indeed cheers!! |
axel @ 18.02.08 - 11:36:43 |
| I have all parts of aspen 2006, need license especially for aspen dynamics.... any help??? |
Bala @ 20.02.08 - 17:13:06 |
| please put any other link for invensys pro/ii coz both d links are not working ..plz check it and tel me....thanx in advance... |
ChEngineer @ 20.02.08 - 17:44:52 |
| Bala, the mirror 2 are OK. I've just tested it... |
aceman @ 23.02.08 - 20:24:08 |
AspenOnes2006's part14 link doesn't work, anyone can fix it? Great job guys.
Thank you very much |
chemtech @ 25.02.08 - 13:48:32 |
Hi dear,
I have downloaded PRO/2 8.1 from mirror 2 link.There is a error in the installation.. After installation, i don't where to overwrite the cracked file(flxlm72.dll)....
so please help me.... |
5377 @ 29.02.08 - 20:20:48 |
Hi Lads,
Has anybody found license for Aspen2006? Is this working?
Thanks |
Process Man @ 01.03.08 - 07:13:10 |
Dear chemtech
You must copy flxm72.dll to the folder that you install proii. for example:
c:\\program files\simsci\proii 8.1\bin\
But this crack is only for 42 dayes.When you begin to install proii, you must select flxm7.2 . |
rob @ 03.03.08 - 21:39:54 |
Hello Guys,
I desperately looking for AspenOne lic. Can anybody help? Thanks. rk.chemeng@gmail.com |
Nukey @ 22.03.08 - 06:32:10 |
Hi ChEngineer, first of all: GREAT JOB!
I downloaded and installed COCO, but I need to add some compounds in order to work. Where can I find compound properties files?
Thanks. |
Nukey @ 23.03.08 - 01:08:16 |
BTW, it is true. Part 19 of Aspen Engineering Suite 2006 is missing. I tried IQAsturias and the forum id down.
Do you have any chance to re-uplod part 19?
Thanks! |
Sam @ 24.03.08 - 15:33:43 |
Nukey ... I checked now. Part 19 is working fine.
@Poster: Great collection. Keep up the good work buddy. |
Fugitive @ 24.03.08 - 22:10:35 |
Hi
Please help me with the AspenOne Lic.
Thanks |
chemengg @ 26.03.08 - 13:57:59 |
all lads dying for aspen one license tell me which product of aspen one do u need if 1 or 2 i could help u
just leave your comments here |
Nukey @ 26.03.08 - 19:54:04 |
AspenTech Aspen Engineering Suite 2006
Part 15 is missing too! Checked 19 and works fine.
chemengg, why don't you post both? |
chemengg @ 27.03.08 - 03:30:04 |
1)aspenone htfs
2)aspen one 13 |
Nukey @ 27.03.08 - 04:39:17 |
Thanks, chemengg, but I was talking about the two Aspentech programs posted here:
AspenTech Aspen Engineering Suite v11.1
AspenTech Aspen Engineering Suite 2006
Thanks! |
Nukey @ 27.03.08 - 06:54:34 |
| Sorry, part 15 of Aspen Eng 2006 is right, what's wrong with rapidshare anyway? LOL |
rashed @ 27.03.08 - 19:01:14 |
| any body have the link of Chemstations CHEMCAD? |
shemz @ 28.03.08 - 19:09:53 |
| There is always this persistant problem with SimPRO licence using FlexLM license manager. It doesnt allow to crack the software; the mere reason for this is at the crack is not a working crack. And in this there is no mistake of the uploader, it has been |
Friend @ 29.03.08 - 13:43:02 |
hi rashed i have CHEMCAD probably i could help u???
peterjames23_2007@yahoo.com |
liron @ 29.03.08 - 15:57:18 |
I desperately need license file to Aspen Engineering Suite 2006 - can anyone help me?
thanks in advance. |
chemkumar @ 29.03.08 - 21:37:06 |
any body have the link for fluent?
the link here doesn't work |
adiadice@gmail.com @ 30.03.08 - 01:32:44 |
| Hey guys.... aspen2006 gets installed easily but anyone got crack |
rcky@go.com @ 30.03.08 - 01:37:03 |
| hey ineed lic file for aspen plus and dyanmics..plzz help... i ahve to finish my thesis |
Friend @ 30.03.08 - 03:41:17 |
rcky,
do u need license for aspen engg suit 11.1? or aspenone ? |
rcky@go.com @ 30.03.08 - 04:29:16 |
| hey friend.. i need license file for aspen one |
rcky@go.com @ 30.03.08 - 04:30:05 |
| kinda of desperate .... i ahve aspenone 2006 but it needs lic file... plzz help |
rashed @ 31.03.08 - 16:16:15 |
hi peter_james.,thanks for the reply.
can u upload the CHEM CAD in sharedzilla.com or mihd.net ? |
Friend @ 31.03.08 - 23:43:53 |
| rashed just mail me ................... |
sum_pro @ 01.04.08 - 20:05:28 |
| What a waste, If the Aspen One 2006 uploaded here does not contain the license file there is no need to waste your bandwidth and time to download it&. So unless and until anybody uploads the license file for Aspen One 2006 please dont download any pa |
ridoo @ 04.04.08 - 16:04:25 |
| prosimHNO3 plizzz |
Nukey @ 09.04.08 - 05:46:46 |
Hey all...
Aspen Engineering Suite 11.1 contains the license file in CD1. |
Friend @ 09.04.08 - 18:38:09 |
noooooooookey!!!!!
buddy just control your ministrations , ya it does contains license file which is .dat .file but aspenone is demanding for .lic file!!!!!! |
Friend @ 12.04.08 - 18:36:33 |
| to all those who r looking for aspenone license,hold on take a breath and jsut mail me i have got the link for crack try yourself (mail mail id is 01.02.08 comment). sorry iam unable to post links here. |
rcky@go.com @ 16.04.08 - 17:05:48 |
| Hi Friend.. wass ur mail id |
Fugitive @ 18.04.08 - 19:53:46 |
Please help me with the FLUENT license file, cause it doesn't work.
Thanks |
Nukey @ 19.04.08 - 06:12:10 |
| The thing is, I have downloaded both versions of Aspen (11.1 and 2006), and both work fine. I just need the MAGNiTUDE folder a-l-o-n-e for 2006. Does anybody have it? Thanks. |
mohammed hussaini @ 19.04.08 - 06:55:06 |
bismillah
to everyone here is a long awaited license file
yes i mean aspen one 2006 license file download link http://rapidshare.com/files/108631899/aspenone_license.rar.html |
mohammed hussaini @ 19.04.08 - 06:59:06 |
always my brother says me u have everything around
you the only thing u need is to have the eyes to see it
he password for rar file is : allahu akbar (sapce beween allahu akbar) . no need to give million thanks or thanks in advance just pray for me .m |
yogesh @ 21.04.08 - 14:13:06 |
Sir, UR CAD/CAM SOFTWARE IS FACING FILLING LOADING ERRORS..
PLZ HELP. |
velayati @ 22.04.08 - 07:17:29 |
| Dear Mohammed. I wanted to pray you, but your license does not work. It seems to be built for one specific workstation. |
mohammed hussain @ 23.04.08 - 18:43:02 |
valayati , i didn't get u (workstation)??????? all the 714 products for aspenone has been unlocked to me when i used the same license file . iam using windows 32 bit XP...... try again and
C it should work |
velayati @ 26.04.08 - 10:53:23 |
| Dear Mohammed, ok,SLM License Profiler shows the license file includes 714 products, but it does not work on my computer. what folder did you put the license file and does your aspen soft work with that? My email: velayati@hotmail.com |
mohammed hussaini @ 26.04.08 - 18:09:13 |
velayati
iam using aspenplus version 2006 right now on my lapi i'll send u the procedure i did . i hope this time it works out |
fugitive @ 28.04.08 - 19:39:54 |
hussaini can u send me the procedure.
fugitive_052@yahoo.com |
liron @ 29.04.08 - 06:26:01 |
hussaini can u send me the procedure as well.
lironsh123@walla.com |
velayati @ 30.04.08 - 05:40:05 |
| I have not recevied the procedure yet. |
Mentor BEJTA @ 30.04.08 - 12:17:02 |
| Salam Alaikum dear Mohammed please can you tell me does AspenOne 2006 include Aspen Plus 12.1 because I need urgently for my thesis. Please write me m_bejta1@hotmail.com I'm muslim from Kosova. May Allah bless you. |
aiball @ 30.04.08 - 13:38:07 |
| licence for aspen 2006 not working..? mohammed hussaini can you explain how you got it to work please! |
mohammed hussaini @ 30.04.08 - 18:18:11 |
mentor BEJTA iam not here as a muslim, iam here as a good human . ok let it be what ever it is . s it includes aspen 12.1
which iam using for my thesis as well may allah bless us all |
mohammed hussaini @ 30.04.08 - 18:21:08 |
velayati,aiball,liron & fugutive
first apology for being late i was busy with my exams . inshallah with in a day or so i will upload exact procedure and a new license generator (ya i mean license generator) |
Mentor BEJTA @ 01.05.08 - 12:05:56 |
| Dear Mohammed thank You very much You are very kind I priciate very much your help. Please can You tell me where can I get simulations examples for Amonnia Synthesis with Aspen plus 12.1 I need for my thesis |
Barny @ 01.05.08 - 15:33:43 |
| Ty very much to the one who posted the license fiel for aspen one 2006 i have a license file generator but i doesnt workjs on my windows vista |
aiball @ 01.05.08 - 16:22:19 |
here is the licence generator for Aspen 2006.
http://rapidshare.de/files/39028774/MAGNiTUDE.rar.html
unrar and run the generator and it will make a licence for you. It is based on your computer hardware, thats why the previous licence file posted d |
aiball @ 01.05.08 - 16:22:56 |
| It is based on your computer hardware, thats why the previous licence file posted did not work |
mohammed hussaini @ 01.05.08 - 18:32:41 |
Mentor BEJTA
u haven't mentioned your thesis route???? any have there is
one file i have with me for kellogg process with 6 million SFCD
capacity complete simulation and result . check your mail i have sent the file .it's done in (pro/II) |
mohammed hussaini @ 01.05.08 - 18:40:41 |
aiball,Barny,vlayati
great job dude(aiball) keep it up . it takes 15-30 min to generate license . aspenone is designed for windows XP not for vista if still u have installing problem i can upload procedure . i never knew that it is hardware dependent |
liron @ 03.05.08 - 10:26:46 |
| The aspenone license key which was generated does'nt work for me. Does anyone have an idea why? |
Barny @ 03.05.08 - 15:37:49 |
| I'd really love the installation guide for windows vista sp 1 please |
Mentor Bejta @ 03.05.08 - 16:10:55 |
| Theank You very much dear Mohammed you helped me very much. Please can I simulate the same example (Amonnia pro II) with Aspen Plus 12.1. My thesis is "Simulation of Amonnia Synthesis with AspenPlus". May Allah bless you. |
Yahya @ 03.05.08 - 16:28:52 |
| Salam Alaikum Mohammed and Bejta. Please can enybody of you help me to get any simulation example with CHRMCAD 5.6 PRO and of courese can enybody on this forum help me how to find CHRMCAD 5.6 PRO. Alaikum Salam. |
Yahya @ 03.05.08 - 16:36:19 |
| Oh sorry for lapsus. Please can enybody of you help me to get any simulation example with CHEMCAD 5.6 PRO and of courese can enybody on this forum help me how to find CHEMCAD 5.6 PRO. Alaikum Salam. |
Mohammed Hussaini @ 03.05.08 - 17:24:18 |
| Barny question is vague???? what installation guide do u need ? vista SP1 or aspenone 2006 for vista ? |
Mohammed Hussaini @ 03.05.08 - 17:27:16 |
liron
do u use vista? if yes just forget aspenone!!!!! if no try selecting standalone during installation it works out this time |
Mohammed Hussaini @ 03.05.08 - 17:32:56 |
Yahya
w salam . as far as i know only two versions of chemcad are out ( in warez community) that is chemcad 5.1.1.3 and chemcad 6 |
Mohammed Hussaini @ 03.05.08 - 17:35:48 |
Yahya
about examples there is a file called document /tutorial/examples are located in chemcad 5.1.1.3 that's more than enough to give u vivid explanation . download link for 5.1.1.3 is located above |
Mohammed Hussaini @ 03.05.08 - 17:42:32 |
Mentor Bejta
s u can abviousluy use the same with aspen plus but u need little bit of pratice for that see aspen documentation for details
i cant explain everything in 255 chars |
Josh @ 03.05.08 - 19:04:38 |
| Can you please upload CD3 of Aspen Plus v.11 on rapidshare? |
aiball @ 03.05.08 - 19:24:58 |
| Liron: Use "Slm configuration wizard" after making the licence file to update aspen. |
liron @ 04.05.08 - 05:03:09 |
| I don't know how to use the Slm configuration wizard. can anyone help me? |
aiball @ 04.05.08 - 08:49:07 |
| liron: run the wizard. choose no for first option, choose configure advance settings |
aiball @ 04.05.08 - 08:49:55 |
| where it says "local file name" click browse and choose the file from the generator (.lic) |
Mohammed hussaini @ 04.05.08 - 16:08:22 |
Josh
Aspen engineering suit 11.1 Cd 3 has already been uploaded check the link above |
Barny @ 04.05.08 - 19:53:23 |
| Hey i have just made a mistake installing gPROMS, i installed it withoput setting licensing server properñly i tired to uninstall it and reinstall it but now it doesnt let me reconfigure the licensing what do i have to do????? |
Yahya @ 05.05.08 - 13:23:04 |
| Men please can anybody of you tell me how to find links for ChemCAD 6 because 5.1.1.3 is very old version. Please help me. |
Yahya @ 05.05.08 - 13:26:05 |
| Salam Alaikum Mohammed please can you tell me where are you from. Thanks man for your help. |
Mentor Bejta @ 05.05.08 - 13:31:17 |
| Salam Alaikum Yahya I have examples for Chemcad 5.1.1.3 please give me your email. |
Mohammed hussaini @ 05.05.08 - 18:17:42 |
yahya
w salam iam from india . here are the links for chemcad 6
but there of no use they do not have crack in it . hence i recommend u to stick to chemcad 5 unless we get fully cracked version |
Mohammed hussaini @ 05.05.08 - 18:18:33 |
links for chemcad 6(No crack included)
http://rapidshare.com/files/100492181/CHEMCAD6.part1.rar
http://rapidshare.com/files/100550486/CHEMCAD6.part2.rar
http://rapidshare.com/files/100600473/CHEMCAD6.part3.rar
http://rapidshare.com/files/100623522/CHE |
Mohammed hussaini @ 05.05.08 - 18:19:54 |
parrrt 4 is prinrted improperly upside this is full link
http://rapidshare.com/files/100623522/CHEMCAD6.part4.rar |
chempetro @ 06.05.08 - 17:03:48 |
| Can somebody please share PIPENET. I need it very urgently. |
Juan B @ 07.05.08 - 17:16:15 |
| does anyone have simulis thermodynamics??? I wanna try it it has great conectivity with matlab and it maybe helpfull |
Puskar @ 07.05.08 - 20:47:12 |
| The Licence generator file for Aspen engineering suite 2006 is working fine. most of the products will be available. Only to note that the lic gen file needs almost 1-2 hr to create the licence file. the final size of the licence file will be 87 KB. |
Mentor Bejta @ 08.05.08 - 13:50:05 |
| Salam Alaikum Mohammed. Please can You give me any instruction to simulate ammonia thynsesis with aspen plus please write me on email. Thank you for understanding. |
Ayman @ 08.05.08 - 13:53:51 |
| Men, I need SuperPro Designer please coud anyone post rapidshare links. |
mohammed hussaini @ 08.05.08 - 14:43:07 |
Ayman
cracked copy of super pro designer are not yet out (rapidshare links) as it is rarely used.any have u can download the demo copy from here http://www.intelligen.com/demo.shtml |
Liron @ 10.05.08 - 17:33:40 |
| Hi, does anyone know where can I download ProSim HNO3 ? |
JUAN B @ 11.05.08 - 14:55:37 |
| How do i install Aspen 2006 on windows vista?? or aspen 11.1 it doesnt, aspen plus doesnt works i need help desperately |
jag @ 12.05.08 - 06:43:34 |
| can some body give links for hysys and pro2 in filefactory or mihd.net |
mohammed hussaini @ 12.05.08 - 17:26:06 |
jag i found links for hysys
Password: islamicstudents
http://mihd.net/xcvuq4
http://mihd.net/i6hqmn
http://mihd.net/cvyefa
http://mihd.net/pu3mt0
http://mihd.net/0zb8pd
http://mihd.net/3p8n2u
http://mihd.net/sga6fy
http://mihd.net/58qox0
http: |
mohammed hussaini @ 12.05.08 - 17:27:15 |
9th and 10th links are here
http://mihd.net/l7xqpi
http://mihd.net/ehd3t7 |
mohammed hussaini @ 12.05.08 - 17:41:07 |
jag these are the links for pro II ( file factory)
http://www.filefactory.com/file/665a00
http://www.filefactory.com/file/0497b4
http://www.filefactory.com/file/9bc242
http://www.filefactory.com/file/964482
http://www.filefactory.com/file/7224fc
htt |
mohammed hussaini @ 12.05.08 - 17:43:06 |
here are ramaining 3 links
http://www.filefactory.com/file/eaa09c
http://www.filefactory.com/file/5f7169
http://www.filefactory.com/file/8802a3 |
mohammed hussaini @ 12.05.08 - 17:45:14 |
| jag if these links are not working check out links above for pro II (file factory) |
rseepersad @ 14.05.08 - 16:45:57 |
| can someone give links for aspen hysys 2006 |
rseepersad @ 15.05.08 - 14:58:51 |
csn someone reup part 3 of the aspen 2006 dvd
the link is dead |
;-) @ 17.05.08 - 02:26:23 |
| any1 knows links for sinet? |
Liron @ 18.05.08 - 06:42:20 |
| Can someone give me links to ProSimPlus? |
ridha @ 18.05.08 - 15:11:58 |
| give me Prosimplus HNO3 simullation of nitric acid process plizzzzzzzzzzzzzzz pliz |
Yahya @ 19.05.08 - 12:04:19 |
| Can someone give me links for Statistica 8.0 or Statistica 7.0 |
mohammed hussaini @ 19.05.08 - 18:10:21 |
yahya links for stastica
http://rapidshare.com/files/34198516/Statsoft_statistica_7.part1.rar
http://rapidshare.com/files/34209526/Statsoft_statistica_7.part2.rar
http://rapidshare.com/files/34221457/Statsoft_statistica_7.part3.rar
http://rapidshare. |
mohammed hussaini @ 19.05.08 - 18:11:33 |
http://rapidshare.com/files/34430637/Statsoft_statistica_7.part4.rar
http://rapidshare.com/files/34188114/Statsoft_statistica_7.part5.rar |
Jay North @ 20.05.08 - 06:04:11 |
| Aspen Suite: The generated licence file shows all available licences. But it asks to insert DVD #6. Browsing to the DVD6 location doesn't help. |
Yahya @ 20.05.08 - 09:33:57 |
| Salam Alaikum thank You very much Mohammed. |
Mentor @ 20.05.08 - 09:39:02 |
| Salam Alaikum Mohammed. Please can you post links for this ebook Product and Process Design Principles: Synthesis, Analysis, and Evaluation, 2nd Edition |
mohammed hussaini @ 20.05.08 - 18:48:28 |
Mentor w salam
here are the links for PDPSAE (good guide for aspen)
http://rapidshare.de/files/18227485/Product_and_Process_Design_Principles.part1.rar
http://rapidshare.de/files/18229033/Product_and_Process_Design_Principles.part2.rar
http://rapids |
mohammed hussaini @ 20.05.08 - 18:49:07 |
http://rapidshare.de/files/18230586/Product_and_Process_Design_Principles.part3.rar
http://rapidshare.de/files/18232087/Product_and_Process_Design_Principles.part4.rar |
mohammed hussaini @ 20.05.08 - 18:50:16 |
http://rapidshare.de/files/18277115/Product_and_Process_Design_Principles.part5.rar
http://rapidshare.de/files/18279722/Product_and_Process_Design_Principles.part6.rar |
Bala @ 21.05.08 - 05:56:06 |
| Hi, Can u pl. post links for book "Process Plant Simulation by Dr.Babu" if available. Thanks. |
Ridha @ 22.05.08 - 13:07:04 |
salam 3alikoum
pliz Prosimplus HNO3 SIMULATION OF NITRIC ACID PROCESS |
Mentor Bejta @ 22.05.08 - 13:47:57 |
| Salam Alaikum thank You very much Mohammed, You are great man May Allah bless You and your family. |
mohammed hussaini @ 22.05.08 - 15:57:55 |
chEngineer,
if u read dis pm just add this crack for chemcad 6
http://ifile.it/5kq0hsv |
Mentor Bejta @ 22.05.08 - 16:30:03 |
| Salam Alaikum Mohammed, please can you post another links for PDPSAE because I cannot download from current links. |
mohammed hussaini @ 22.05.08 - 16:41:11 |
ridha
i have been on hunt for prosim for couple of days but nothing is yet fished . in the mean time check this if it works for u
http://www.torrentz.com/527c97402ab3237564e52c5742d0671b9366ac51 |
mohammed hussaini @ 23.05.08 - 03:29:25 |
Mentor,
Let me tell u 1 thing there is no substitute for aspen documentation for learning aspen plus PDPSAE is good for ICARUS but not for aspen plus any have here is fresh link
link http://ifile.it/cdukitp . |
mohammed hussaini @ 23.05.08 - 03:31:52 |
Mentor
inst ed i recommend u this book (of course good for distillation only) "distillation design and control using Aspen Plus"link for this book is http://mihd.net/5gkwab |
Mentor Bejta @ 23.05.08 - 10:51:43 |
| Salam Alaikum Mohammed May Allah reward you. |
Rizwan @ 23.05.08 - 13:29:20 |
Even i am facing the same problem.
"Aspen Suite: The generated licence file shows all available licences. But it asks to insert DVD #6. Browsing to the DVD6 location doesn't help."
Can some one help.
md_rizwan@yahoo.com |
Humayun @ 23.05.08 - 14:32:15 |
| Can I get links for "HTRI Xchanger 5.0" software? |
barny @ 23.05.08 - 22:52:50 |
| Does any one has aspen 2006 documentation????? |
velayati @ 24.05.08 - 07:01:42 |
Dear Mohammed
Thank you very much for the good site you have made. In Aspen Suit 2006, Aspen OLI Interface needs password. Do you have the password?
As well does anybody have a username and password for http://support.aspentech.com/ ? |
ridha @ 24.05.08 - 21:10:29 |
| mohammed hussaini thank you 1000000 thank is no Prosimplus HNO3, no problem |
mohemmed hussaini @ 25.05.08 - 02:49:29 |
| humayun links for HTRI Xchanger 5.0 including crack and cracking is bit tricky i hope u'll manage if not maim me.. |
mohemmed hussaini @ 25.05.08 - 02:50:28 |
http://rapidshare.com/files/97482312/HTRI_5.part1.rar
http://rapidshare.com/files/97496005/HTRI_5.part2.rar
http://rapidshare.com/files/97659439/HTRI_5.part3.rar |
mohemmed hussaini @ 25.05.08 - 02:53:00 |
| velayati , i am not the administrator of this site it's "ChEngineer" leave your pm on his name he will help u...... |
velayati @ 25.05.08 - 11:21:34 |
| Mohemmed, The HTRI rar files need password? |
mohemmed hussaini @ 25.05.08 - 16:52:13 |
| oh ya does it need (HTRI) ? i don't have the password it's with zeeshan may be i need some time to display it by the time try lavteam or lavteam.org . i hope it works.... |
xxxxx @ 25.05.08 - 20:47:55 |
| the password for HTRI rar is lavteam |
xxxxx @ 25.05.08 - 20:53:57 |
| HTRI Xchanger Suite® -5 RS crack http://rapidshare.com/files/100474404/Xmp5_by_VALS.rar |
velayati @ 26.05.08 - 09:29:52 |
Dears
Any news about Aspen OLI? |
Yahya @ 26.05.08 - 14:39:58 |
| Hello, please can anybody pos links for PINCHLENI 2.20 or 3.0. This is software for Pinch technology. |
Mentor Bejta @ 27.05.08 - 12:22:44 |
| Salam Alaikum Mohammed, please can you post me any dictionary for Chemical Engineering I have one but it's not good "Engineering Dictionary" mcgraw-hill. |
ChEngineer @ 27.05.08 - 14:14:28 |
Hey guys! To everybody needs a specific ebook to take a look to this website: http://gigapedia.org
If you didn't find the book there becoming useless to look for it anywhere 'cause there's NOT an online version of it surely... |
Ashok @ 28.05.08 - 11:49:01 |
| thanks for a great a job |
ingequimuc @ 29.05.08 - 06:56:14 |
| Did anyone install Aspen 2006 properly?.... It always asks for DVD #1 wich I dont have :( Anyone? |
chempower @ 29.05.08 - 13:03:19 |
| Hello to everyone. Please I need DYNSIM 4.2.3 with crack |
Aspen 2006 @ 29.05.08 - 14:34:33 |
1. Select "Install by Product" tab instead of "Install by aspenONE Application".
2. Select "DVD 6 - Aspen Engineering" from the menu.
3. Click "Install" and proceed. |
mohammed hussaini @ 30.05.08 - 13:57:38 |
chempower
here is the link for dynsim , but u need to crack the nuts it's a dhinese website and also u need to have emule client to download this application http://www.emuledb.com/2007/08/28/0000161480.html |
ridha @ 30.05.08 - 22:07:25 |
salam alikoum jamian
install crack chemcad.6 pliz !!!!
thenks |
ingequimuc @ 31.05.08 - 05:04:12 |
Aspen 2006, thanx for the advice! :) on the other hand...
Do you have the Visual Encyclopedia of Chemical Engineering Equipment??
--->http://www.engin.umich.edu/research/mel/equipflyer/equip.html
I got Ver.1.0 and it only runs on win95/NT... But t |
Mohsen @ 31.05.08 - 09:25:05 |
I need solution for "Basic Principles and Calculations in Chemical Engineering (7th Ed.,
Himmelblau) "
Please. |
Liron @ 31.05.08 - 10:28:58 |
| Does anyone have Prosimplus or Prosim HNO3? |
mohammed hussaini @ 31.05.08 - 19:54:30 |
mohsen link for solution manual (i am n't sure of edition)
http://rapidshare.com/files/47504324/Supplimentary_Problems_for_Bacis_Principles_and_Calculations_in_Chemical_Engineering.pdf |
Mohsen @ 02.06.08 - 01:21:32 |
Thanks alot dear mohammed.
The supplementary problems are in a CD accompanied by the book. I need "solution manual" to it's problems.
Thanks again for your attend. |
jag @ 02.06.08 - 14:21:33 |
@mohammed hussaini
thanku for the links
part 4 in pro2 is missing |
mohammed hussaini @ 02.06.08 - 17:12:25 |
| mohsen book has solution for selected problems in the text but not all ... jag leave u r comment for ChEngineer he is administrator . i have checked link it's ok to me |
ait @ 02.06.08 - 17:22:35 |
Salut à Tous
Visitez le site www.egept.net !
Quelqu'un aurait-il DYNSIM ?
Merci d'avance |
almmohd @ 03.06.08 - 02:58:14 |
| very nice site. is there a book like "distillation design and control using Aspen Plus" that shows how to use hysys or refsys? |
chempower @ 03.06.08 - 19:42:16 |
| Hallo Mr. Hussaini, Please can you post me rapidshare links for DYNSIM 4.2.3 with crack |
Mentor Bejta @ 03.06.08 - 19:56:24 |
| Salam Alaikum Mohammed, first of all i want to thank you for Dictionary. Please can you post me any softwarte for thermodynamic diagrams like pV, Ts, or is diagrams i want to create these diagrams but it is hard to do with Ms word, Visio or something like |
watchme @ 06.06.08 - 14:16:33 |
| Is there anyone who has successfully installed the aspen plus software.Can anyone tell me where can I find the user guide to all these simulation softwares.I will be really great full to all the contributor of this great website.thanks in advance |
mohammed hussaini @ 07.06.08 - 09:10:00 |
almmohd
"distillation design and control using Aspen Plus"link for this book is http://mihd.net/5gkwab |
mohammed hussaini @ 07.06.08 - 09:13:37 |
Bejta
i really don't understand what exactely u mean . do u want software for plotting graphs (pV , Ts.....)in this case u have data with u or u want software to generate data for the same????? |
watchme @ 07.06.08 - 15:06:16 |
| Salam Alaikum Mohammad,I m in state of quandry,recently I downloaded Chemcad 6 using the links given above but on unraring it I found no exe file instead there is some ISZ file.What is this ISZ file Mohammad ,and what do I do with this.please help. |
mohammed hussaini @ 07.06.08 - 16:58:20 |
watchme
wsalam it's an iso image of chemcad 6 u just have to download software that can mount iso image like (power iso , magic iso to name some ) heer is one such software
http://rapidshare.com/files/26893770/UltraISO.v8.6.2.2011.RETAIL-IND.rar.html |
Juan B @ 07.06.08 - 19:00:28 |
| I Installed the aspen engineering suite but i am not able to find user guides to all software can anyone help on that??? |
ait @ 08.06.08 - 17:47:45 |
Salam Alaikum
Mr. Hussaini, Please can you post me the rapidshare.com link for DYNSIM 4.2.3 with crack
i need it
thank you for your help |
xxxxx @ 08.06.08 - 21:56:17 |
INVENSYS.SIMSCI.DYNSIM.V4.2.3-MAGNiTUDE
http://www.verycd.com/topics/184032/download
download with eMule v0.49a
http://prdownloads.sourceforge.net/emule/eMule0.49a-Installer1.exe |
velayati @ 09.06.08 - 07:11:07 |
| Hi, does anyone have the Petrosim software? |
ait @ 09.06.08 - 13:56:52 |
| thank you for your help xxxxx |
Chemtech @ 09.06.08 - 15:08:59 |
| Hello, ChEngineer please can you upload rapidshare links for DYNSIM v4.2.3 |
ChEngineer @ 09.06.08 - 19:41:09 |
| Hi, Chemtech... Sorry but I cannot access P2P server... so could anyone download it by eMule and after upload to RS or MiHD? In this case I can add the links to our collection... Cheers! |
Mahmoud Samy @ 10.06.08 - 13:22:43 |
Dear All,
I ask about hysys v 2006.5 or v 2006 pakage
is aspen plus contain hysys or not?
Thanks |
Abrar @ 11.06.08 - 13:11:42 |
| Samy...Aspen Enginering Suite 2006 contains Hysys 2006. |
Mahmoud Samy @ 12.06.08 - 11:53:46 |
more thanks Abrar
can i know what is Aspen Enginering Suite 2006 contain? |
Marmara @ 12.06.08 - 13:49:21 |
| Wow men this is the best site that I ever seen. |
Abrar @ 13.06.08 - 07:13:28 |
Samy...Aspen Engineering Suite 2006 contains
Aspen ACOL",
Aspen Adsim®,
Aspen Aerotran®,
Aspen APLE",
Aspen Batch Plus®,
Aspen BatchSep",
Aspen CatRef®,
Aspen Chromatography®,
Aspen Cust |
Abrar...continued @ 13.06.08 - 07:14:39 |
Aspen Custom Modeler®,
Aspen Dynamics®,
Aspen FCC®,
Aspen FIHR",
Aspen FLARENET",
Aspen FRAN",
Aspen Hetran®,
Aspen HTFS Research Network",
Aspen HX-Net®,
Aspen Hydrocracker®,
|
Abrar...continued @ 13.06.08 - 07:15:34 |
Aspen Hydrotreater",
Aspen HYSYS®,
Aspen Icarus Process Evaluator",
Aspen Icarus Project Manager",
Aspen Kbase®,
Aspen MUSE",
Aspen OnLine®,
Aspen OnLine Deployment",
Aspen PIPE" |
Abrar...continued @ 13.06.08 - 07:16:35 |
Aspen Plus®,
Aspen Polymers Plus®,
Aspen Process Manual",
Aspen Process Tools",
Aspen Properties®,
Aspen RefSYS",
Aspen TASC",
Aspen Teams®,
Aspen TICP",
Aspen Zyqad" |
ChEngineer @ 13.06.08 - 14:10:31 |
| Hey guys!... Please, do NOT request e-books here!... It's a page to share softwares... You can find any e-books in this site: http://gigapedia.org =) |
Vera @ 13.06.08 - 16:07:25 |
| Sorry ChEngineer. I will not repeat again |
Marmara @ 13.06.08 - 16:25:11 |
Please i need this software for chemistry:
Hyperchem Professional 8.03 withs keygen or crack |
ChEngineer @ 13.06.08 - 19:52:24 |
| It's ok, Vera... =) |
mohammed hussaini @ 14.06.08 - 00:06:18 |
marmara links for HP 8.03 got it at 51protocol
http://mihd.net/1u4fiz
http://mihd.net/pzx6m3
http://mihd.net/79kgf0 |
Raffal @ 14.06.08 - 03:55:29 |
| Hi any one can help me. I downloaded ProII 8.1 iso and missing with licence file. After installation successfully finished, can not run. Any one can upload the licence file for ProII 8.1 Iso. |
velayati @ 14.06.08 - 10:12:46 |
| Does anybody have the Petrosim software? |
Mentor Bejta @ 14.06.08 - 14:29:53 |
| Salam Alaikum Mohammed, Please can you tell me the price of AspenOne2006 I'm just curious to know. |
Vera @ 14.06.08 - 15:52:02 |
| I need software for solving step by step integrals I have MathXpert v3.02 but I think it's not so good |
mohammed hussaini @ 14.06.08 - 17:51:26 |
| i am not sure of commercial suit cost but many XXXXXXX universities are being granted yearly license ( which is to be renewed yearly ) for about us $ 15000 /- (to be precise cost is not fixed it changes geographically ) in some developing countries XXXXXX |
mohammed hussaini @ 14.06.08 - 17:54:51 |
| it costs only $ 2000/- for five years license as per team EAT who cracked the sommercial version 11.1, costs $ 100,000 how easily we are "swallowing " $ 100,000!!!!! |
mohammed hussaini @ 14.06.08 - 17:58:05 |
Vera
did u ever used maple ( recommended and used by millions of chemical engineers across the globe )
link : http://www.mininova.org/tor/1481319 |
mohammed hussaini @ 14.06.08 - 18:02:35 |
raffal
"reading early comments before throwing one is a good habit"
Process Man @ 01.03.08 - 08:13:10
Dear chemtech
You must copy flxm72.dll to the folder that you install proii. for example:
c:\\program files\simsci\proii 8.1\bin\
But thi |
Bart @ 15.06.08 - 14:17:59 |
| Does Aspen 2006 work under vista sp1? If so can you provide me a installation guide for it? |
ridha @ 16.06.08 - 05:22:47 |
pliz my frends istal gproms
thenks |
udy @ 16.06.08 - 08:09:50 |
| can any one post the crack for pvelite 2008 ??? |
Vera @ 16.06.08 - 12:45:00 |
| Hello mohammed, can maple solve integrals step by step. I have Mathematica 6.0 and Mathxpert 3.02 but i'm interesting to get any more powerfull software for math calculus |
ChEngineer @ 16.06.08 - 14:15:53 |
| Vera, you can use SciLab (similar to Matlab)... It's free! http://www.scilab.org |
ChEngineer @ 18.06.08 - 21:13:11 |
| Toshi, you must sign up first and after the links will be available. If you dont find this e-book there... there's NOT an online version of it. |
mike @ 19.06.08 - 00:12:10 |
| the link Datafromgraph 1v1 is not exist. pls re-upload, tq |
Marmara @ 19.06.08 - 13:56:30 |
| Hello, Mohammed can you tell me how can I get crack for ACD/ChemSketch 11.0 |
ChEngineer @ 19.06.08 - 14:31:58 |
| mike, the link is OK! try again... |
mohammed hussaini @ 19.06.08 - 14:50:14 |
Marmara
during my search this is what google has revealed me"Introducing Version 11.0 of ACD/ChemSketch Freeware"
any have u r link :http://rapidshare.com/files/105438536/chemsk11.rar |
mohammed hussaini @ 19.06.08 - 15:07:29 |
well this links are purely meant for "die hard simulation fanatics" it gives u fundamentals required through a series of video tutorilas
http://mihd.net/xic7uy
http://mihd.net/f6vgwr
http://mihd.net/btv7d1
http://mihd.net/2og9nt
http://mi |
mohammed hussaini (continued....) @ 19.06.08 - 15:09:43 |
http://mihd.net/8nclf1
http://mihd.net/uormxn
http://mihd.net/b9h8fd
after downloading rename 2/3 part"Appropriately as part 02/03" and enjoy |
Patrascu Marius @ 21.06.08 - 10:59:40 |
Can anybody help me to find
FRNC-5PC General Purpose Fired Heater Simulation Program with licence ?
... or something like this.
Thank you for helping me. |
Adnan @ 21.06.08 - 11:13:46 |
| Can anybody post standalone licence for AspenTech Aspen Engineering Suite 2006. The current licence does not work for me. Please can anyone post me any instruction how to install this software, I don't have internet conections at home |
Adnan @ 21.06.08 - 11:36:06 |
| Please I need instructions and licence file to install Aspen Plus 12.1 |
velayati @ 22.06.08 - 15:18:33 |
| Adnan, first you should note that existing aspen license generator makes standalone license. It may take more than 30 minutes to generate the file, so be patient. After generating the file you should define it to the software by going to Start Menu\Progra |
velayati @ 22.06.08 - 15:19:55 |
| Start Menu\Programs\AspenTech\Common Utilities\SLM Configuration Wizard. In this utility program, select "No" for 1st question, then select "Yes" for avanced settings configuration, then select "Browse" for "Local File N |
velayati @ 22.06.08 - 15:21:06 |
| then select "Browse" for "Local File Name" and specify the generated license file on yo |
